SALt-Go (Salt Water Lamp) Energy Blocks Pair

𝐏𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐥𝐢𝐠𝐡𝐭 𝐭𝐡𝐞 𝐬𝐢𝐦𝐩𝐥𝐞, 𝐬𝐮𝐬𝐭𝐚𝐢𝐧𝐚𝐛𝐥𝐞 𝐰𝐚𝐲 𝐰𝐢𝐭𝐡 𝐭𝐡𝐞 𝐒𝐀𝐋𝐭-𝐆𝐨 𝐄𝐧𝐞𝐫𝐠𝐲 𝐁𝐥𝐨𝐜𝐤𝐬.

Designed as a refillable aluminum anode, these energy blocks are the core of your SALt-Go Salt Water Lamp—delivering reliable illumination using just saltwater. Each pair is engineered for efficiency and durability, providing up to 30 days of everyday use based on 8 hours of daily operation.

Crafted from high-quality aluminum, the anode ensures consistent performance while remaining easy to replace when needed. When it’s time for a refill, simply follow the step-by-step video instructions to safely install a new pair and keep your lamp running smoothly.

Whether for emergencies, off-grid living, or eco-friendly lighting, SALt-Go Energy Blocks offer a dependable and sustainable power solution—no electricity required.

𝐊𝐞𝐲 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬:

* Refillable aluminum anode (pair)

* Up to 30 days of use (8 hours per day)

* Easy replacement with guided video instructions

* Designed for SALt-Go Salt Water Lamp

* Clean, renewable energy source using saltwater

Stay prepared and powered—naturally.

𝐅𝐀𝐐𝐬 (𝐅𝐫𝐞𝐪𝐮𝐞𝐧𝐭𝐥𝐲 𝐀𝐬𝐤𝐞𝐝 𝐐𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬):

𝐖𝐡𝐚𝐭 𝐝𝐨 𝐈 𝐧𝐞𝐞𝐝 𝐭𝐨 𝐮𝐬𝐞 𝐒𝐀𝐋𝐭-𝐆𝐨?

To use SALt-Go, you only need water, salt, and the SALt-Go lamp. Simply mix salt and water or use seawater, then pour the solution into the lamp.

𝐇𝐨𝐰 𝐥𝐨𝐧𝐠 𝐝𝐨𝐞𝐬 𝐨𝐧𝐞 𝐬𝐚𝐥𝐭𝐰𝐚𝐭𝐞𝐫 𝐦𝐢𝐱𝐭𝐮𝐫𝐞 𝐥𝐚𝐬𝐭?

One saltwater mixture can power the lamp for up to 10 hours. For best performance, the saltwater should be replaced every 10 hours of use to keep the light bright and efficient.

𝐂𝐚𝐧 𝐈 𝐮𝐬𝐞 𝐬𝐞𝐚𝐰𝐚𝐭𝐞𝐫?

Yes, seawater can be used directly in the lamp. This makes SALt-Go especially useful for coastal and island communities where seawater is readily available.

𝐒𝐡𝐨𝐮𝐥𝐝 𝐈 𝐝𝐫𝐚𝐢𝐧 𝐭𝐡𝐞 𝐬𝐚𝐥𝐭𝐰𝐚𝐭𝐞𝐫 𝐰𝐡𝐞𝐧 𝐧𝐨𝐭 𝐮𝐬𝐢𝐧𝐠 𝐭𝐡𝐞 𝐥𝐚𝐦𝐩?

Yes, it is advisable to drain the saltwater when the lamp is not in use. This helps extend the lifespan of the aluminum energy blocks and keeps the lamp working efficiently for a longer time.

𝐇𝐨𝐰 𝐨𝐟𝐭𝐞𝐧 𝐬𝐡𝐨𝐮𝐥𝐝 𝐈 𝐫𝐞𝐩𝐥𝐚𝐜𝐞 𝐭𝐡𝐞 𝐞𝐧𝐞𝐫𝐠𝐲 𝐛𝐥𝐨𝐜𝐤𝐬?

The energy blocks should be replaced every 30 days, or after about 200 hours of use, based on using the lamp for around 8 hours per day. Regular replacement ensures that the lamp continues to produce steady light.